Major Signs of Improper Roof Installation
The roof is your home’s first line of defense against the elements, so it’s important that it’s installed correctly. Unfortunately, not all roofing contractors are created equal, and some will cut corners to save time and money.
A bad roofing job can cause excessive damage to your home and put your family at risk, so it’s important to be able to spot the signs of a poorly installed roof. In this blog post, we’ll go over seven major signs of improper roof installation.
7 Signs of a Bad Roof Installation
Getting a roof replacement is a big job and a sizable investment, so you want to make sure it’s done right. If you see any of these signs on your roof, it’s important to call a professional roofing contractor to come and take a look. Trying to fix the problem yourself could make it worse and put you in danger.
1. Uneven Appearance
An odd appearance is something you’ll notice right away. If your roof looks uneven or has strange bumps, it’s a sign that something was done wrong during installation.
A professional roofing contractor will make sure your roof is level even before they start the installation process. If you see that your roof is uneven after the job is done, it’s a sign that the contractor cut corners.
An uneven roof can cause a number of problems, including:
Pooling water: Water will pool in certain areas instead of draining properly if your roof is uneven. This can lead to leaks and other serious damage.
Sagging: Uneven roofs are more likely to sag over time, especially if they’re not properly supported. This can cause even more water pooling and leaks.
Reduced lifespan: An uneven roof is more likely to experience premature wear and tear, which means you’ll have to replace it sooner than you would otherwise.
If you notice these issues, contact a professional roofing contractor right away. They may be able to fix the problem without having to replace the entire roof.
2. Missing Or Damaged Shingles
Missing or damaged shingles are another sign that your roof wasn’t installed properly. If the contractor installed your roof without securing the shingles, they can easily fall off, especially during high winds.
Damaged shingles are also a sign of poor installation. The contractor may have used defective materials or damaged the shingles while installing them. Either way, missing or damaged shingles leave your roof vulnerable to leaks and other damage.
3. Mismatched Shingles
Mismatched shingles are another sign of a bad roof installation. If the contractor used different batches of shingles or different types of shingles, they might not match in color or texture. This can give your roof an odd appearance and make it more susceptible to damage.
Mismatched shingles are also more likely to come loose because they don’t fit together as snugly. This can lead to leaks and other serious damage.
4. Improper Gutter Installation
The gutter is what collects excess water from your roof and drains it away from your home. If the gutter is installed improperly, it can cause serious problems, including:
Water damage to your home’s foundation
Staining on the exterior of your home
Mold and mildew growth
Fortunately, this problem is usually easy to spot. An improperly installed gutter will be sagging or pulling away from your home. If you see this, contact a professional roofing contractor to have it fixed.
You should also inspect your gutters regularly to make sure they’re still in good condition. Even if they were installed properly, they can become damaged over time and need to be replaced.
5. Misuse Of Nails
Proper nailing techniques and materials are essential to a well-installed roof. Nails that are too long or made of the wrong material can cause all sorts of problems, from leaks to premature deterioration.
The contractor must have the expertise and experience to know what type of nails to use for your specific roof. If they don’t, it’s a sign that they’re not qualified to do the job.
6. Stains On The Roof
Stains on your roof are usually a sign of leaks. If the contractor doesn’t properly seal the roof, water can seep in and cause all sorts of problems, including mold growth and wood rot.
In some cases, stains can also be a sign that the contractor used defective materials. For example, if you see black streaks on your roof, it could be a sign that the contractor used substandard asphalt shingles.
7. No Drip Edges
Drip edges are strips of metal that are installed along the edge of your roof. They help to direct water away from your home and prevent it from seeping under your shingles. Roofers install drip edges below the shingles to provide the following benefits:
Prevent shingle blow-off: Shingles are more likely to blow off in high winds if they don’t have a drip edge.
Protect your home’s fascia: The fascia is the board that runs along the edge of your roof. It can become damaged if water is allowed to seep under your shingles and rot the wood.
Seal the edge of the roof: A drip edge helps to seal the edge of your roof and prevent water from leaking in.
Extend the longevity of your roof:A properly installed drip edge can help extend your roof’s lifespan by protecting it from water damage.
If you don’t have drip edges on your roof, it’s a sign that the contractor didn’t do their job properly. You should contact a professional roofing contractorto have them installed as soon as possible.
How to Avoid a Bad Roof Installation
Now that you know the signs of a bad roof installation, you can take steps to avoid it. The best way to avoid problems is to hire a qualified, experienced roofing contractor.
Here are some tips to ensure you hire a qualified contractor:
Check their credentials: Make sure the contractor is licensed and insured. You can also check to see if they have any complaints against them with the Better Business Bureau.
Get multiple bids: Get at least three bids from different contractors before making your decision. This will help you to get an idea of what a fair price is.
Ask for references: Ask the contractor for references from previous clients. This will give you an idea of their workmanship and whether or not they were satisfied with the work. Alternatively, look for a roofing contractor with positive online reviews.
Don’t be afraid to ask questions: Don’t hesitate to ask the contractor if you have any questions. A good contractor will be happy to answer any questions you have.
Ask for a warranty: Make sure the contractor offers a warranty on their work. This will protect you in case there are any problems with the roof after it’s been installed.
By following these tips, you can avoid hiring a contractor that will do a poor job of installing your roof.
Avoid All The Hassle – Call Roof MD Experts!
The best way to avoid a bad roof installation is to start with a quality roofing contractor. Roof MD is a fully licensed and insured roofing contractor with years of experience. Our comprehensive roofing services will ensure that your roof is installed correctly the first time.
We understand the importance of proper installation, and we take pride in our workmanship. We’ll make sure your roof is installed properly, so you can avoid all the hassle.
Call us today at (901) 403-8385 to schedule a free consultation. We’ll be happy to answer any questions you have and give you a free estimate.